Behavior Tech Test

Competency assessment

Before you can apply for RBT certification, a qualified assessor has to watch you perform a set of tasks. This page explains the Initial Competency Assessment as the BACB describes it.

What the assessment is

The Initial Competency Assessment is one of the eligibility requirements for RBT certification. According to the RBT Handbook, you must demonstrate that you can competently perform the tasks on the BACB’s assessment form after you complete the 40-hour training and before you apply.

It is a practical check, not a written test, even though many people call it the RBT competency exam. An assessor gives you the chance to perform each task and decides whether you did it competently. The exam at Pearson VUE comes later and is a separate step. See the RBT exam.

The BACB updated the assessment for 2026. The current form is titled RBT Initial Competency Assessment: Effective January 1, 2026. The BACB only accepts its own form.

Who can assess you

The BACB’s assessment packet describes two roles:

Role Who qualifies What they do
Responsible assessor An active BCBA or BCaBA who has completed the 8-hour supervision training Oversees the assessment, makes sure it follows the rules, signs the final attestation, keeps the records
Assistant assessor Someone with an active RBT certification or higher who has shown proficiency in the material Conducts some or all of the tasks when the responsible assessor delegates them

A responsible assessor may use several assistant assessors for one assessment. The requirement that assistant assessors hold an RBT certification or higher is one of the 2026 changes named in the BACB’s transition guidance.

The packet also sets relationship rules:

  • The assessor may not be related to you, subordinate to you or employed by you. Paying an assessor for the assessment does not make you their employer.
  • You, the responsible assessor and any assistant assessors must all be employed at, or have a contractual relationship with, the same organization. That organization must be the one providing services to the client involved in the assessment.
  • The person who delivered your 40-hour training may also be your assessor.

In practice this means the assessment normally happens with an employer or an organization you have a contract with, because some tasks need a real client.

How the assessment is done

According to the packet, the assessment may take one session or several. It can be conducted in person, live over the internet, or through recorded videos made specifically for the assessment.

Each task is assessed in one of three ways. The form states which options are allowed for each task.

Assessment type What happens
With a client The assessor observes you performing the task with a client who receives behavior-analytic services.
Role-play The assessor observes you performing the task with another person acting as the client.
Interview In a live interview, in person or online, you describe the concept and give examples.

The form has 19 tasks in four groups. This is a summary, not the BACB’s wording:

Group Tasks Topics
Measurement 1 to 3 Continuous measurement, discontinuous measurement, entering data and updating graphs
Assessment 4 to 5 Preference assessments, ABC data
Skill acquisition and behavior reduction 6 to 14 Discrete-trial teaching, naturalistic teaching, chaining, shaping, discrimination training, prompting, token systems, crisis and emergency procedures, plus one of antecedent interventions, differential reinforcement or extinction
Professionalism and requirements 15 to 19 Session notes, client dignity, professional boundaries, supervision requirements, seeking clinical direction

All 19 tasks must be completed. Three of tasks 6 to 14 must be demonstrated with a client. Tasks 16 to 19 are interview tasks.

If you do not show competence on a task, the assessor may give corrective feedback and assess that task again on another day. The packet says this repeats until you demonstrate competence, and that corrective feedback may not be given during the final assessment of a task. When every task is initialed, the responsible assessor signs and dates the attestation.

Timing rules

Three time limits apply, according to the handbook:

Step Rule
40-hour training Completed in no less than 5 days and no more than 180 days
Competency assessment After the 40-hour training is complete, and no more than 90 days before you submit the certification application
Certification application Stays active for 90 days

The order matters. An assessment done before you finish the training does not meet the requirement. An assessment that is more than 90 days old when you apply does not either, and you would need a new one.

You upload the completed assessment form with your application, together with the training certificate and the attestation form. Applications accept PDF or JPEG files, and unreadable documents may be rejected. The handbook says previously submitted documents are not reviewed again for a new application, so keep your own copies.

If you trained before 2026, check the BACB’s transition guidance. It says applicants on or after January 1, 2026 must complete the updated assessment after a 40-hour training that meets the 2026 requirements, and that there is no bridge course for older trainings.

Honesty rules

The RBT Ethics Code (2.0) applies to applicants as well as certificants. Standard 3.03 says RBTs do not cheat or help others cheat on RBT competency assessments. The handbook adds that the BACB can invalidate a certification if it was based on false or forged information. A signed form for tasks you did not actually perform puts both you and the assessor at risk.

Assessments at renewal

Until 2026, RBTs repeated a competency assessment every year to renew. The 2026 rules phase this out. The handbook and the transition guidance describe three situations:

Your situation Competency assessment
You recertify during 2026 Yes. You complete the RBT Recertification Competency Assessment one last time, no more than 45 days before your expiration date.
You recertify in 2028 or later on the 2-year cycle No. You need 12 professional development units and a recertification application.
You return from voluntary inactive status Yes. You complete the assessment no more than 45 days before you request reactivation. From January 1, 2027 it is called the RBT Reentry Competency Assessment, with the same content.

If your certification expires and you want to become an RBT again, you start over as a new applicant. For a certification that lapsed on or after January 1, 2026, the transition guidance says you need the new 40-hour training and the current Initial Competency Assessment before you reapply. The renewal page has the details.

Preparing for it

The assessment covers skills from your 40-hour training, so review that material first. Ask your assessor which tasks will be done with a client, which by role-play and which by interview. For the interview tasks, be ready to explain the supervision requirements and to give examples of professional boundaries and client dignity. The practice exam and the ethics quiz help with the knowledge behind the tasks.

Sources

The BACB revises its forms and packets. Download the current assessment form from bacb.com before your assessment, and check the handbook for changes.

Last checked against the BACB's documents in November 2026.

All practice tests